Stanley Adjustable Block Plane Blades 1 3/8" & 1 5/8"
These two plane blades are for Stanley block planes with adjustable blade depth. One is 1 3/8" wide, 4 3/8" long; the other is 1 5/8" wide, 4 3/8" long.
Lot of Five 2" Block Plane Blades: Hudson, Stanley
This set of five block plane blades are all 2" wide. One bears a Hudson Tool Co. mark, another bears a STANLEY MADE IN USA mark, the rest are unmarked.
This lot of block plane blades includes various blades with 2 7/16" cutting edges. Includes blades branded JAMES:CAM, J.B. STEVENS, MOULSON BROTHERS, and BUCK BROTHERS. Two of them come with cap irons (aka chipbreakers) and screws.
This set of pliers includes 4 pliers with the following specs: * 8" lineman's pliers, Marked KRAEUTER & Co. NEWARK N.J. U.S.A. No 1831-8 * 5 1/8" flat pliers, marked OTC in diamonds and 20 * 5" lineman's pliers, marked TRADE MARK MADE IN U.S.A. RED DEVIL * 4" long unusual design with a "sidecar" style cutter lineman's pliers, tips are warped
Set of 6 Unusual Vintage Box Wrenches: Open close star
Tool Type: Assorted mechanic's box wrenches
Brand: Various
Materials: Steel
Marks: Various
Condition: Good
Measurements: Set includes wrenches of the following specifications (from top to bottom in first picture): * Angled open/closed box wrench. marked with a C in a circle. Open end is 31/32", closed is 11/16". * Angled open box wrench. Marke with "1404" in middle and "THE BILLINGS SPENCER CO (B in triangle) HARTFORT CONN. U.S.A. and 1/40C and 3/160C on the ends. * 8 point closed star box wrench. Marked "233" in the middle. 11" long * 90 degree closed box wrench. Marked 11/16; Snap-On; 3/4 * Double open box wrench. Marked "HECK NUT"; "J.M. WILLIAMS & CO. BROOKLYN N.Y."; "WILLIAMS FORGED IN USA"; 604; C05; 1/2; 7/16 USS * Angled double open box wrench. Marked "USMC"; "727H"; "9/16"; "7/8"
Tool Type: Mechanic's Nut Wrench, S-Curve
Brand: Larger two are Billings, smaller one is unknown
Materials: Cast iron
Marks: Smallest: GARDINER; LIBB DINER MI; B in a circle
Medium: BILLINGS MADE IN USA 2017; 3/8 NUT; 7/16 CAP 7/16 S.A.E.
Largest: DROP FOERGED; 79; MADE IN USA; 11/16; 5/8
Condition: Good
Measurements: smallest: 6" long, 7/16" and 9/16" nut holes
medium: 8 1/4" long, 3/8" and 7/16" nut holes
largest: 8 3/8" long, 5/8" and 11/16" nut holes
Tool Type: Adjustable Pipe Wrench, Stillson patent
Brand: Two RIDGE RIGID, one Walworth, one Trimont Mfg. Co.
Materials: Steel
Marks: Largest has ROXCO and THE TRIMONT MFG CO ROXBURY MASS. U.S.A. AND HEAVY DUTY PAT APLD FOR 10; The 8" and 6" wrenches have RIGID HEAVY DUTY and 8 and 6 on them; last one has STILLSON and WALWORTH MADE IN U.S.A.
Condition: Good, all adjust, slightly worn teeth but none missing or broken
Measurements: Wrenches when closed are 5 1/2", 6", 7 3/8", and 9 1/2" long
This is a tool lot of five Ford wrenches. I will describe them in the order they are seen in the first image below. The first is a small cresent wrench. Its sockets are 5/8 and 3/4 inches. It is marked "Ford" and "1" and "2". The second wrench is marked "FORD USA" and "M" and its sockets measure 9/16 and 5/8. The third wrench is marked "FORD" and "1" and "2" and its measurements are 3/4 and 11/16. The fourth wrench is combination offset box wrench and crescent wrench. The crescent wrench is 15/16 and the socket is 5/8. The fifth wrench is marked "FORD USA 01A-17017 B 62." This is an offset box wrench, the sockets measure 3/4 and 7/8.
This pliers toolset includes four designs of slipjoint pliers from antiquated makers. Includes, from right to left:
*
Vulcan PL-28, 8" long when closed, diamond textured handles
*
Red Devil 820, 6 1/2" long when closed, diamond textured handles
* Marked "FORGED IN USA," some wear on teeth, 6 1/2" long
* Marked "DROP FORGED," 6 1/4" long
This antique wrench set includes the following sizes of wrench:
*
Marked "M25," Sizes 15/32" x 17/32"
* Marked "525," Sizes 5/16" x 1/4"
* Marked "VII," Sizes 1/2" hex nut, 3/8" Square
* Size 1/2" Closed square box wrench, angled 3/8" open square
* S wrench, 15/32" and 1/2"
* Marked with "AS & SW" in a diamond and "Austin," 1/2" x 7/16"
