Tool Type: Adjustable Nut Wrench for cycles
Brand: Frank Mossberg
Materials: drop forged steel
Marks: A-1 MANF-D BY FRANK MOSSBERG CO. ATTLEBORO, MASS. U.S.A.
Condition: old tool patina, still adjusts, has some wear around the jaws
Measurements: 5" long
Antique German Roger Printz Patent Wedge Adjusting Bicycle Nut Wrench
Tool Type: Wedge adjusting bicycle wrench
Brand: unknown (German, design patent is Roger Printz)
Materials: drop forged steel
Marks: MADE IN GERMANY
Condition: Adjusts fine, some light pitting, has that "old tool" patina
Measurements: 9 1/2" long
Set of 6 Unusual Vintage Box Wrenches: Open close star
Tool Type: Assorted mechanic's box wrenches
Brand: Various
Materials: Steel
Marks: Various
Condition: Good
Measurements: Set includes wrenches of the following specifications (from top to bottom in first picture): * Angled open/closed box wrench. marked with a C in a circle. Open end is 31/32", closed is 11/16". * Angled open box wrench. Marke with "1404" in middle and "THE BILLINGS SPENCER CO (B in triangle) HARTFORT CONN. U.S.A. and 1/40C and 3/160C on the ends. * 8 point closed star box wrench. Marked "233" in the middle. 11" long * 90 degree closed box wrench. Marked 11/16; Snap-On; 3/4 * Double open box wrench. Marked "HECK NUT"; "J.M. WILLIAMS & CO. BROOKLYN N.Y."; "WILLIAMS FORGED IN USA"; 604; C05; 1/2; 7/16 USS * Angled double open box wrench. Marked "USMC"; "727H"; "9/16"; "7/8"
This set of pliers includes 4 pliers with the following specs: * 8" lineman's pliers, Marked KRAEUTER & Co. NEWARK N.J. U.S.A. No 1831-8 * 5 1/8" flat pliers, marked OTC in diamonds and 20 * 5" lineman's pliers, marked TRADE MARK MADE IN U.S.A. RED DEVIL * 4" long unusual design with a "sidecar" style cutter lineman's pliers, tips are warped
Tool Type: Mechanic's Nut Wrench, S-Curve
Brand: Larger two are Billings, smaller one is unknown
Materials: Cast iron
Marks: Smallest: GARDINER; LIBB DINER MI; B in a circle
Medium: BILLINGS MADE IN USA 2017; 3/8 NUT; 7/16 CAP 7/16 S.A.E.
Largest: DROP FOERGED; 79; MADE IN USA; 11/16; 5/8
Condition: Good
Measurements: smallest: 6" long, 7/16" and 9/16" nut holes
medium: 8 1/4" long, 3/8" and 7/16" nut holes
largest: 8 3/8" long, 5/8" and 11/16" nut holes
Tool Type: Adjustable Pipe Wrench, Stillson patent
Brand: Two RIDGE RIGID, one Walworth, one Trimont Mfg. Co.
Materials: Steel
Marks: Largest has ROXCO and THE TRIMONT MFG CO ROXBURY MASS. U.S.A. AND HEAVY DUTY PAT APLD FOR 10; The 8" and 6" wrenches have RIGID HEAVY DUTY and 8 and 6 on them; last one has STILLSON and WALWORTH MADE IN U.S.A.
Condition: Good, all adjust, slightly worn teeth but none missing or broken
Measurements: Wrenches when closed are 5 1/2", 6", 7 3/8", and 9 1/2" long
This is a tool lot of five Ford wrenches. I will describe them in the order they are seen in the first image below. The first is a small cresent wrench. Its sockets are 5/8 and 3/4 inches. It is marked "Ford" and "1" and "2". The second wrench is marked "FORD USA" and "M" and its sockets measure 9/16 and 5/8. The third wrench is marked "FORD" and "1" and "2" and its measurements are 3/4 and 11/16. The fourth wrench is combination offset box wrench and crescent wrench. The crescent wrench is 15/16 and the socket is 5/8. The fifth wrench is marked "FORD USA 01A-17017 B 62." This is an offset box wrench, the sockets measure 3/4 and 7/8.
This pliers toolset includes four designs of slipjoint pliers from antiquated makers. Includes, from right to left:
*
Vulcan PL-28, 8" long when closed, diamond textured handles
*
Red Devil 820, 6 1/2" long when closed, diamond textured handles
* Marked "FORGED IN USA," some wear on teeth, 6 1/2" long
* Marked "DROP FORGED," 6 1/4" long
This antique wrench set includes the following sizes of wrench:
*
Marked "M25," Sizes 15/32" x 17/32"
* Marked "525," Sizes 5/16" x 1/4"
* Marked "VII," Sizes 1/2" hex nut, 3/8" Square
* Size 1/2" Closed square box wrench, angled 3/8" open square
* S wrench, 15/32" and 1/2"
* Marked with "AS & SW" in a diamond and "Austin," 1/2" x 7/16"
Antique Unusual West German Angled Adjustable Nut Wrench
Tool Type: Angled Johansson patent "Crescent" style adjustable nut wrench
Brand: unknown
Materials: steel
Marks: W GERMANY; 52 107
Condition: old tool patina, has some nicks and dings, stops short of closing all the way by about 9/16"
Measurements: 11 5/8" long
This set of spoons and one fork includes a stand as well. Included in this set: * Tests and looks gold plated, not sure what the underlying metal is, some black tarnish. Three and four leaf clover motif, no maker's mark. * Marked WM ROGERS (star) I S; looks like plate * Marked "HOTEL ASTOR" with a flower * Marked "1847 ROGERS' BROS. X9 TRIPLE" * marked "1847 ROGERS BROS 4" * Marked "WALKER & HALL $ C (flag) Grosvenor House"
Set of 4 Antique Adjustable All Steel Pipe Wrenches
Tool Type: Adjustable Pipe Wrenches
Brand: 2 Rigid, one Trimo, one Walworth
Materials: steel
Marks: * WALWORTH COMPANY MADE IN U.S.A.; 10; 36F WALCO PIPE WRENCH PATENT NO 1362002 * rigid pat 1727923; 6 * TRIMO ALLOY; TRIMONT MFG CO ROXBURY MASS USA; C-M * RIGID PAT PEND T6; RIGID TOOL CO ELYRIA O. U.S.A.
Condition: All adjust, the Trimo sticks sometimes opening and closing and has a loose jaw plate, the angled Rigid is a little beat up on the handle Measurements: Largest is 10" when closed, Trimont is 6 1/4" long closed, angled rigid is 5 1/2" long, straight rigid is 5 5/8" long
Tool Type: Tractor and Silo Wrench
Brand: Syracuse
Materials: Cast Iron
Marks: Syracuse Z2
Condition: Good, some rough-cast edges and dings, has a slight horizontal S-curve that I'm not sure if is original or from being used as a prybar
Measurements: 10 1/2" long, aperatures are 1" and 1 1/8"
Antique Wizard No. 9 Adjustable Cycle & Auto Nut Wrench
Tool Type: Adjustable mechanic or machinist's nut wrench for cycles or autos
Brand: Wizard
Materials: Cast iron
Marks: WIZARD NO. 9 MADE IN PAT'D WORCESTER, MASS. U.S.A.
Condition: Good, dark patina, some wear on the corners, adjusts fine.
Measurements: 9" long
Tool Type: Adjustable nut wrench
Brand: B&C (Bemis & Call)
Materials: Steel, wood, red paint
Marks: TRADE B&C MARK; BEMIS & CALL H&T CO. SPRINGFIELD, MASS. USA
Condition: Good, pretty tarnished but it adjusts all the way open and closed pretty smoothly.
Measurements: 6 1/2" long
Antique Brown & Sharpe No. 10 Analog Tube Micrometer
Tool Type: Analog Tube Micrometer, 0" to 1" in 32nds and 64ths
Brand: Brown & Sharpe
Materials: Steel
Marks: Graduations; No. 10; Brown & Sharpe Mfg. Co. Providence, R.I. U.S.A.
Condition: Good, some pitting from age, looks about right but probably needs calibration, tube turns smoothly, ratchet works
Tool Type: Double open box wrench, 1/2" and 15/32"
Brand: Davis & Furber Machine Co.
Materials: Cast Iron, nickel finish
Marks: B in a triangle on the back (Billings & Spencer?); 77S DAVIS & FURBER
Condition: Good, finish is mostly intact, a few dings around the edges of the lips
Measurements: 5 5/8" long
This antique adjustable nut wrench is faintly marked with the "ROBINSON" maker's mark and a faded patent date ending with "85." Adjusts open and closed smoothly. 10 1/2" long overall. Wooden handle.
This antique slide wrench is marked, "PAT'D SEPT 20 1921 MF'D BY HANDE HANDLE WRENCH CO NEW BEDFORD MASS. TRADE MARK." The sliding mechanism seems to be locked up.
Antique H.D. Smith "Perfect Handle" 10 1/2" Nut Wrench
This is a 10 1/2 inch monkey wrench. It is marked "Smith & Co. / Oct 30-1900 / 5-1901-FEB. 26 1901 / MADE IN U.S.A. / PERFECT HANDLE" A previous owner has also stamped "FS" into the metal with an awl.
Antique European Center Adjust 5 mm Square Nut Wrench
This antique square (wagon or carriage?) mechanic or machinist's nut wrench features a smooth adjustment mechanism. Marked "5 MM," the distance between the jaws when closed as far as they'll go. 7 1/4" long when closed.
This antique wrench is 7 1/4" long when closed all the way. Marked "8" and "GUARANTEED" on the head and "Tool Steel," "J.P. DANIELSON CO., INC JAMESTOWN,N.Y. U.S.A. 8 IN. DROP FORGED MADE IN U.S.A." on the handle. Smooth action opening and closing.
